Samsung NY58J9850WS User Manual page 81

To delay starting the self-cleaning cycle
1. Repeat steps 1 and 2 on the previous page.
2. Press the Delay Start button. The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press the START/SET button. The oven will start self-cleaning at your specified time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.
To turn off the self-cleaning cycle, press the OFF/CLEAR button. The cycle turns off, but the
door remains locked and the Lock icon blinks until the oven temperature falls below 400 °F
(200 °C).
After self-cleaning
• The door stays locked until the internal oven temperature falls below 400 °F.
• When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash
residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed
using a vinegar-soaking cloth.
• If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears on the
display until the oven cools down. Wait until the message disappears, and start a new
cycle.
• The cooling fan automatically runs for certain amount of time after self-cleaning.
CAUTION
• Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or steam
could burn you.
NY58J9850WS_DG68-00692A-00_EN.indd 81
2
4
3
English 81
2015-07-07 11:45:23