Samsung NY58J9850WS User Manual page 80

Maintenance
To perform the self-cleaning cycle
Make sure the door lock is released. Remove all racks from the oven cavity.
1. Make sure the oven door is closed completely and unlocked.
2. Press the Self Clean button, and then select the cleaning time. See the table below.
3-hour cycle
3. Press the START/SET button. The oven door is locked and the oven begins to heat up.
4. When the self-cleaning cycle is complete, the oven beeps 10 times. The door will remain
locked and the Lock icon will blink until the oven temperature falls below 400 °F (200 °C).
5. When the Lock icon changes to an open lock, you can open the oven door. The Lock icon
changes to an open lock when the oven temperature drops below 400 °F (200 °C).
6. Press the OFF/CLEAR button to display the time of the day.
CAUTION
• Do not use the surface burners while the gas oven is performing a self-cleaning cycle.
WARNING
• Be sure all controls are OFF and all surfaces are COOL before cleaning any part of the
range.
80 English
NY58J9850WS_DG68-00692A-00_EN.indd 80
Once
2
Twice
5-hour cycle
NOTES
• Turn off the surface burner while the
oven is performing a self cleaning cycle.
Self-clean will not operate if a surface
burner is on.
3
5
Three times
2-hour cycle
2015-07-07 11:45:23