Wiring Diagram - Dynasty Spas Spa & Hot Tub 2016 Operator's Manual

SPA (XE / YE-CLASS) WIRING DIAGRAM
Electrical wiring North American model in.xe™
For 240 V (4 wires)
Correct wiring of the
electrical service box,
GFCI, and pack terminal
block is essential.
Call an electrician
if necessary.
Electrical wiring European model in.xe.ce™
Single-phase
in.xe.ce 230 V
or 230/400 V
Correct wiring of the
electrical service box,
RCD, and pack terminal
block is essential!
Call an electrician
if necessary.
Sec1:26
For 120 V (*3 wires)
*If connected to a 3
wire system, no 240 V
component will work.
Refer to "Connections
for 120 V heater" section
of this manual.
Dual-phase
WARNING!
in.xe.ce models must
always be connected
to a circuit protected
by a Residual-Current
Device (RCD) having
a rated operating
residual-current not
exceeding 30 mA.
Spa Operator's Guide