Wiring Connections - Dynasty Spas Spa & Hot Tub 2016 Operator's Manual

(XM2.ce) WIRING CONNECTIONS
in.xm.ce
EU
Electrical wiring
1 x 230 VAC (1 x 32A) Single-phase 1 x 230 VAC (1 x 32A) Single - Phase
An IEC certified bushing that will maintain the IPX5 rating must be used. The power cord must be in
accordance with the national electrical code of the country in which the in.xm.ce is to be installed
*Dual-phase system
that on a polyphase power system, all electrical phases must share the same neutral.
1 x 230 VAC (2 x 16A) Dual-phase*
1 x 230 VAC (2 x 16A) Dual-Phase
1 x 230 VAC (3 x 16A) Three-phase
1 x 230 VAC (3 x 16A) Three-Phase
An IEC certified bushing that will maintain the IPX5 rating must be used. The
power cord must be in accordance with the national electrical code of the
country in which the in.xm is to be installed.
*Dual-phase system: Two electrical phases out of a three-phase power
system. It's important to note that on a polyphase power system, all electrical
phases must share the same neutral.
Sec1:21
1 x 230 VAC (2 x 16A) Dual-phase*
two electrical phases out of a three-phase power system. It's important to not
:
1 x 230 VAC (3 x 16A) Three-phase
Spa Operator's Guide
connections
connectio
1 x 230 VAC (3 x 16A) Three-ph