Indoor Installation - Dynasty Spas Spa & Hot Tub 2016 Operator's Manual

Table of Contents

Advertisement

SET-UP & DELIVERY GUIDELINES
Getting ready for delivery & Set-up of your new spa
General considertaion for indoor installation
Installing your spa indoors creates an extremely different set of considerations.
Here again, with proper planning, no matter what room your spa goes in, it will
be your favorite room.
• Work with your spa dealer and contractor to insure all local building,
electrical and plumbing codes are met.
• Plan for a floor drain to drain off excess water or for draining and
cleaning your spa.
• A ventilation fan may be necessary due to high humidity created by
your spa.
• Finished material in your spa room should also be capable of
withstanding increased humidity.
• Excess Water: Normal use of the spa causes large amounts of water
to splash out of the unit. Depending on the specific installation,
additional provisions may have to be made for propoer removal of
water.
• Clearance Access: In order to better service your spa, clearance for
access to spa must be 38 inches (92cm) at equipment compartment
and 24 inches (61cm) around the remaining area.
Sec1:28
Spa Operator's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xe/ye-classXm2

Table of Contents