General Spa Maintenance; Protect Your Cover - Dynasty Spas Spa & Hot Tub 2016 Operator's Manual

GENERAL SPA MAINTENANCE

Proper maintenance for your spa cover
1) Use a soft broom to remove accumulation after every snowfall or ice
storm.
2) Splash cool tap water on the hardware to free them if they become
frozen shut. Household lubricating oil will keep the lock free, but
apply carefully because it can damage the cabinet finish.
3) We recommend a good treatment with vinyl conditioner before the
first snow or ice. If possible, treat during the winter too.
4) Monitor your water chemistry. Even if the spa is not used regularly,
improper water chemistry can cause a mildew build-up on the cover.
Clean, PH controlled water will prolong the life of the cover.
5) If mildew is found, remove foam cores from the vinyl encasement.
Mix 1 gallon of water, a teaspoon of mild dish washing soap and a
cup of bleach. With a soft bristle brush, scrub the inside and outside
of the vinyl encasement thoroughly. Take a washcloth and wipe
down each foam core; rinse thoroughly. Place the encasement in
the sun and foam cores in the shade to dry. Once everything is
thoroughly dry, spray the cores and encasement with a mildew
inhibitor. Allow to dry completely, then reassemble. The key here,
of course, is to maintain proper water chemistry to avoid mildew.
6) We suggest rotating the cover every six months to maintain even
wear. Unzip the cover, remove the foam cores, turn over and
reassemble.
Ask Your Dealer About Using A Cover Lifter
Sec1:44

PROTECT YOUR COVER!

Spa Operator's Guide