Waterfall control
Jets
Your new spa features a variety of jet styles. All jets regardless of style
return the water to the spa. Air is mixed with the water by using the air
controls (if equipped) creating a gentle to most vigorous massage.
Water Diverter Valve
The water diverter valve controls the output of the pump(s) water flow to
either side of the spa. It will provide even water flow to all jets if left in the
half way position. The purpose of this valve is to increase or decrease
the output of one side or another for maximum or minimum water flow
in case of one or two person usage. This valve is also used to turn the
master massage jet on and off, if so equipped. Colors/style may vary from
drawing. A water diverter valve is the largest of the valve controls.
Although all three controls look similar in appearance, they are easily
discernible by size. The air control is the smallest, the mini diverter valve
is medium in size, and the water diverter valve is the largest .
Air control
A Mini Diverter Valve, an Air Control, and a Water Diverter Valve.
Sec1:33
SPA TERMINOLOGY
Air control
Locations and design will vary on each spa model.
Spa Operator's Guide