Important Safety; Instruction; Read And Follow - Dynasty Spas Spa & Hot Tub 2016 Operator's Manual

Table of Contents

Advertisement

IMPORTANT SAFETY

When installing and using this electrical equipment, basic
safety precautions should be followed, including the
following:
WARNING -
1)
use this product unless they are closely supervised at all times.
DANGER-RISK OF CHILD DROWNING.
2)
Extreme caution must be exercised to prevent unauthorized access by
children. To avoid accidents, ensure that children cannot use the spa
unless they are supervised at all times.
NOTE
:
minimum No. 4 AWG minimum 75˚C copper conductor between this unit
and any metal equipment, metal enclosures of electrical equipment, metal
water pipe, or conduct within 5 feet (1.52 m) of the unit.
DANGER - RISK OF ELECTRIC SHOCK.
3)
Install spa at least five (5) feet (1.52 m) from all metal surfaces. A spa may
be installed within five (5) feet (1.52 m) of metal surfaces if, in accordance
with the National Electrical Code / IEC, each metal surface is permanently
connected by a minimum No. 4 AWG (6. mm) minimum 75˚C copper
conductor attached to the wire connector on the terminal box. A grounding
lug is provided for this purpose.
DANGER - RISK OF INJURY.
4)
this spa are sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the pump, be sure
that the flow rates are compatible.
NOTE:
missing. Never replace a suction fitting with one rated less than the flow
rate marked on the original suction fitting.
Sec1:7
INSTRUCTIONS
WARNING!

READ AND FOLLOW

ALL INSTRUCTIONS
To reduce the risk of injury, do not permit children to
A wire connector is provided on this unit to connect a wire of a
Never operate the spa if the suction fittings are broken or
Spa Operator's Guide
The suction fittings in

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xe/ye-classXm2

Table of Contents