Set-Up And Delivery Guidelines; Surface & Pad Requirements; Access Clearance - Dynasty Spas Spa & Hot Tub 2016 Operator's Manual

SET-UP & DELIVERY GUIDELINES
Getting ready for delivery & Set-up of your new spa
GETTING READY FOR DELIVERY & SET-UP OF YOUR NEW SPA
Surface and Pad Requirements
Your new portable spa must be placed on a uniformly firm, flat, and level surface.
A concrete pad 3" (7.5cm) thick is best. If your spa is located near sprinklers,
adjust or cap them so they do not hit the siding of the spa.
Balconies and deck requirements
• Decking must be constructed to support 85 pounds per square foot.
• Balconies must be constructed to meet current state and local codes.
• Gates must be self-closing and self-latching.
Access & Clearance
• Your spa requires 48" (1.22m) of clearance through gates between house and
side fences, and up to 8.5' (2.6m) overhead clearance depending on the
size of the unit.
• The clearance required to turn a corner can be equal to the length
of the spa.
• All debris blocking access to the job site must be removed prior to
delivery. Any trimming of trees or bushes, removal of debris, leveling
of ground or other general maintenance must be done prior to
delivery and is the responsibility of the customer.
General Considerations for outdoor installation
Proper planning will increase your total enjoyment factor with your new spa.
Listed below are some additional items to consider when planning your
installation.
• How spa will complement landscaping and vice versa.
• View from inside of spa and view of spa from inside the home.
• Exposure to sunlight and shading from trees.
• Privacy
• Getting to spa from house and return.
• Proximity to dressing room and bathrooms
• Storage for spa chemicals
• Local building codes (if applicable)
• Power cable
Decking must be constructed to support 85lbs. per sqft. (38 kgs.)
Sec1:27
CAUTION!
Spa Operator's Guide