Removal - Motorola MC75A Integrator Manual

Insert SAM Card
Figure 1-10
Replace the plug.
6.
Align the plate onto the back housing.
7.
Replace Plate
Figure 1-11
Secure the plate to the back housing using the four torx (T5) screws.
8.
Perform a warm boot.
9.

Removal

Press the red Power button to suspend the MC75A.
1.
Using a torx (T5) screwdriver, remove four screws securing the plate to the back housing.
2.
Lift plate off the back housing.
3.
Remove the plug covering the SAM slots.
4.
Press the SAM card in until it ejects.
5.
Remove the SAM card.
6.
Getting Started 1 - 11