Frame Bracket Installation - Peco 06131512 Operator's Manual

2-2 Frame Bracket Installation

Secure the right frame bracket P#(B0866) to the rear
frame of the mower, using (1) existing metric hex bolt,
(2) 5/16"-18 x 1" HHCS P#(K1154) and (2) 5/16"-18
nylon flange locknuts P#(K2516). Refer to Figure 2-2.
Secure the left frame bracket P#(B0865) to the rear
frame of the mower, using (1) existing metric hex bolt,
(2) 5/16"-18 x 1" HHCS P#(K1154) and (2) 5/16"-18
nylon flange locknuts P#(K2516). Refer to Figure 2-2.
Note: For PTO driven models, refrain from securing the
(2) 5/16"-18 x1" HHCS on the right frame bracket, until
performing Section 2-4.
(2) 5/16"-18 x 1"
(1) Metric
Hex Bolts
Existing Bolt
(2) 3/8"-16 x 1"
Hex Bolts
(4) 3/8"-16
Locknuts
Secure the rear frame bracket P#(B0867) to the left and
right frame bracket, using (4) 3/8"-16 x 1" HHCS
P#(K1191) and (4) 3/8"-16 nylon flange locknuts
P#(K2038). Refer to Figure 2-2.
Left Frame
Bracket
(4) 5/16"-18
Locknuts
Rear Frame
Bracket
7
Figure 2-2
Right Frame
Bracket
(2) 5/16"-18 x 1"
(2) 3/8"-16 x 1"
Hex Bolts
(1) Metric
Existing Bolt
Hex Bolts