Lower Mount Tube Installation; Upper Frame Assembly Installation - Peco 06131512 Operator's Manual

2-12 Lower Mount Tube Installation

Secure the (2) lower mount tubes P#(B0640) to the rear
frame bracket using (2) 5/16"-18 u-bolts P#(K1098) and
(4) 5/16"-18 nylon flange locknuts P#(K2516) PER
TUBE. Refer to Figure 2-13.
Figure 2-13
Clevis
Pin
Hair Pin
Clip
Lower Mount
Tubes
(2) 5/16"-18
U-Bolt
PER TUBE
2-13 Upper Frame Assembly
Installation
Position the upper frame assembly P#(A1058) above the
lower mount tubes as shown in Figure 2-13. Slide the
upper frame assembly down onto the lower frame tubes
and secure using (2) clevis pins P#(K0133) and (2) hair
pin clips P#(K0088).
Upper Frame
Assembly
13
(4) 5/16"-18
Locknuts
PER TUBE