Page 1
Assembly and Operating Instructions for Outback® Cook Dome 701 and Cook Dome 702 Charcoal Barbecues Cook Dome 701 Cook Dome 702 Photographs are not to scale. Specifications subject to change without prior notice. For outdoor use only. Not for commercial use.
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram’. Outback® Outback® CODE PART Cook Dome 701 Cook Dome 702 Hood HOOD Hood Handle Barbecue Body Cooking Grill...
Page 3
B1. Parts Diagrams: Cook Dome 701 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram.’...
Page 4
B2. Hardware Reference Diagram: Cook Dome 701 Specifications subject to change without prior notice. D1, D2...
Page 5
C1. Parts Diagrams: Cook Dome 702 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram.’...
Page 6
C2. Hardware Reference Diagram: Cook Dome 702 Specifications subject to change without prior notice. D1, D2 D1, D2, D3...
Page 7
Cook Dome 701 Cook Dome 702 Cook Dome 701 users, skip this step and proceed directly to step 2. Attach Barbecue Body (B1) onto Body Air Vent (B5) by inserting M6x10 Bolts (D1) through the Ø6 Washers (D2), body air vent, barbecue body, Ø6 Washers again and secure with M6 Nuts (D3) .
Page 8
Cook Dome 701 Cook Dome 702 Secure the Short and Long Legs (C1, C2) to the leg supports by inserting M6x10 Bolts (D1) through Ø6 Washers (D2) and screwing into leg supports. Cook Dome 701 Cook Dome 702 Unscrew the Locknuts (D4) from the Leg Support Rack (C4).
Page 9
Cook Dome 701 Cook Dome 702 Slide the Wheels (C5) over each straight bar of the leg support. Secure the wheels into place with the locknuts. Cook Dome 701 Cook Dome 702 Carefully turn the completed trolley over, right side up.
Page 10
Cook Dome 701 Cook Dome 702 Place the Charcoal Grill (B3) onto the lower brackets in barbecue body. Ensure the charcoal grill lies level within the body. Place the Cooking Grill (B2) onto the upper brackets in barbecue body. Ensure the cooking grill lies level within the body.
Page 11
Carefully place the Hood (A1) onto the barbecue body. Cook Dome 701 users: Caution - the hood must not be left in the closed position whilst cooking. Note: The hood can be hooked onto the back of the barbecue body whilst it is removed for...
products as they burn too quickly in this E. Important Information design. We recommend using charcoal briquettes. Use only enough briquettes to Please read understand these cover the charcoal grill in a single layer. Do instructions before assembly and use. overload charcoal grill.
Specifications are subject to change without prior notice. the winter months. A full range of heavy-duty Outback® covers is available for all models. Do not leave the barbecue exposed to outside weather conditions or stored in damp, moist areas.
Page 14
OUTBACK barbecues are warranted to the original purchaser against defects in materials and workmanship for a period of one (1) year from the date of purchase. OUTBACK UK will, within this period, supply replacements for defective parts free of charge provided that: The product has not been used for trade, professional or hire purposes.
Need help?
Do you have a question about the Cook Dome 701 and is the answer not in the manual?
Questions and answers