Nikon COOLPIX S2 VAA36001 Repair Manual page 81

Item
Shooting with a speed
light
Light adjustment accu-
racy
Guide No. FULL
(ISO100・m)
Recycling time
Wrong flash
Quality of image
(Photography with EIAJ
chart)
Resolution in AF
（10 ～ 0.3m）
・ Tele-end: 0.3 ~ 1.4m
・ Wide-end: 0.3 ~ 2.5m
・ Macro-wide-end 0.3 ~ 2.5 ｍ
In the above range, ± 0.5 Ev or less
(Photography mode: AUTO , ・Speed light: Compelling flash)
・ 5.5 ± 0.4 EV
(Charge for 10 seconds with the full-charged secondary battery and
perform measurement within 1 second.)
・ Within 6.5 seconds
・ Perform charging with a full-charged secondary battery for
10 seconds and carry out full flashing within 1 second. Then,
measure the time taken until the speed light LED finishes blinking
while pressing lightly the shutter release button.
・ Wrong flash must not occur.
(Check by loading/unloading a battery, giving a light shock and
operating mode buttons except S2.)
・The resolution must be in compliance with the following values in
all the postures of the EIA J chart evaluation.
<High quality of image>
Center horizontal/vertical: 1150 TV pcs.
Periphery horizontal/vertical: 750 TV pcs.
・Take a picture on condition that the camera is in the status of
aperture "open" and "without ND" while "AUTO" and the image
quality priority mode are set.
・Equip the 5100K viewer with a chart in all the positions and at the
distance of 0.3m or more and shoot an object in the full range of
angle of view.
・Then, open the recorded image data file through Photoshop and
check the resolution visually.
・Check each posture and the difference of zoom reciprocation.
・The resolution must be in compliance with the following value in
the whole zoom area.
Center horizontal/vertical: 1150 TV pcs.
・Measure the TV resolution pieces at center.
・Check each posture and the difference of zoom reciprocation.
- R6･ S2 -
Criteria
VAA36001-R.3667.A
Applied tool(s)
Standard reflection
plate
Flash meter
Battery
Stop watch
Battery
Battery
EIAJ chart
Photoshop
Siemens chart
EIAJ chart
Photoshop
Siemens chart