Nikon COOLPIX S2 VAA36001 Repair Manual page 47

9. Connecting the camera to the computer
1) Connect the camera to the cradle.
2) Insert the camera connector of the USB cable into the USB port connector of the cradle.
3) Connect the cable to the USB port on PC.
10. Calibration software
・Turn on the power switch of the camera.
・When the calibration software starts, the following is displayed on the PC monitor.
Supply the power from the
AC adapter EH-63.
USB Cable（UC-E10）
- A30 ･ S2 -
VAA36001-R.3667.A
To the USB port