[How to write]
1. Insert the prepared card into the camera.
2. While pressing the central OK button of the multi-selector, press the Playback button for about 1 second.
3. The screen for updates appears. Select "Yes".
4. The message of completing writing appears.
①
Insert the above card (including the data for writing
"nanddat" and "Firmware").
②
Playback button
While pressing the central OK button of the multi-selec-
tor, press the playback button for about 1 second.
Pressing the central
OK button
- A26 ・ S2 -
③
The screen for updates (nanddat) appears. Select "Yes".
④
On the previous screen, "nanddat (initial image data)" is
written. Then, the screen will change for writing of the
preduct firmware.
VAA36001-R.3667.A