Nikon COOLPIX S2 VAA36001 Repair Manual page 42

4. Initial image data writing and Firmware upgrading
Write the data of initial images, and go on to upgrade the firmware.
Device
・ AC adapter (EH-63)
・ SD card for firmware upgrading (capacity of approx. 16MB) × 1
[How to create an upgrading SD card]
1) Format SD card on PC.
2) Create a folder named "firmware" in the root directory of the SD card.
3) Copy "firmware.bin" into the created folder.
4) Copy "nanddat.bin" into the root directory of the same SD card.
Note) When only firmware upgrading is performed without replacing CP-1 PCB, copying "nanddat.bin" into the
SD card is not necessary (because the initial image data is included in the CP-1 PCB).
- A25 ･ S2 -
VAA36001-R.3667.A