Nikon COOLPIX S2 VAA36001 Repair Manual page 48

11. Lens adjustment
[Preparations]
・ Turn the power switch of the adjustment collimator (C-DSC) J63090 to on.
・ Turn the power switch of the camera to on. (Do not connect the USB cable to PC at this time.)
・ Check the positions so that the chart center in the collimator may be at the center of the screen.
・ Turn the power switch of the camera to off.
[Conditions]
・ Set the adjustment collimator and the camera (front surface of lens) so that the distance between them may be as
short as possible (approx. 5.5cm).
・ When setting the camera onto the cradle, the camera must face the front of the collimator. Set them properly.
※ Place the cradle to be horizontal (by using a mount or box properly). (Fig. 1)
Camera
カメラ
Cradle
クレードル
Horizontal
水平
[How to]
・ Double-click on "DscCa1Di.exe".
・ Select "Lens Data" on "Test" of "LCD".
・ Input the value of the bar code, which is attached to the rear of the lens, into the text box of "Lens data Dialog".
Then, click "Set".
・ Click "Exit" and close the dialog box.
Adjustment collimator
調整用コリメータ
(Siemens star chart built-in)
（ジーメンスターチャート内蔵）
Input the value.
+36 +250
050218
Ａ１
０267
- A31 ･ S2 -
Adjustment collimator
Camera
Set it horizontally.
※ Refer to page A1.
VAA36001-R.3667.A
（Fig.1）
36