Nikon COOLPIX S2 VAA36001 Repair Manual page 19

BUTTON TOP UNIT
・ Mount the release button [#245].
Fit it.
・ Insert the section "A" of the button top unit [#239] and the speaker [#241] into the sections "B" and "C" of the inner
front cover unit [#201] respectively. Then, fix them.
※ Make sure that the FPC of the speaker [#241] is set into the section "C".
Button top unit [#239]
Release button [#245]
Inner front cover unit [#201]
Section "B"
Section "A"
- A2･ S2 -
・ Mount the pad top [#243] by fitting its bosses.
※ Unless the bosses of the pad top [#243] are fitted into
the holes of the inner front cover unit [#201] normally,
the release button cannot be pressed smoothly.
Inner front cover unit [#201]
Pad top [#243]
Boss
Section "C"
VAA36001-R.3667.A
FPC
Speaker [#241]