Starting A Video Conference; Making A Video Conference Call; Calling Using Speed Dial (2-Party Conference/3-Party Conference/4-Party Conference) - Panasonic KX-VC300 Operating Instructions Manual

Starting a Video Conference

Making a Video Conference Call

S
t
You can make a video conference call using one of the following methods.
a
r
Note
t
•
During a video conference call, you cannot perform the following operations:
i
–
Pressing [Menu] to display the Menu screen.
n
–
Pressing [Contact] to display the contact list screen.
g
•
a Make sure that peripheral devices (e.g., display, main video camera) are turned on.
V
•
If a called party does not answer a video conference call within approximately 60 seconds, the call will
i
be terminated automatically.
d
•
If you are using the KX-VC300, 3-party/4-party video conference calls can only be made after
e
purchasing an activation key card (KX-VCS301) to activate multiple-party video conference calls
o
(Page 107). For details about the activation key, contact your dealer.
C
•
2-party/3-party/4-party video conference calls can be made using the outgoing call history.
o
•
Only 2-party video conference calls can be made using the incoming call history.
n
•
You cannot add parties to an existing video conference call.
f
•
During a 3-party/4-party video conference call, even if only one party ends the video conference call,
e
the rest of the parties will also be disconnected.
r
•
A video conference call will start with only the parties that answered the call. For example, if only one
e
party answers a 4-party video conference call, the video conference call will start as a 2-party video
n
conference call.
c
•
3-party/4-party video conference calls may not be possible depending on bandwidth settings
e
(Page 90, Page 112).
•
Video conference calls can be made using a SIP URI through a SIP server only when in IP Mode and
if SIP settings have been made correctly.
•
When connecting to non-Panasonic video conference systems, you can make only 2-party video
conference calls.
Calling Using Speed Dial (2-party Conference/3-party Conference/
4-party Conference)
Note
•
To call using speed dial, you need to have a speed dial number programmed in "Speed Dial" in the
contact list (Page 84).
36 Operating Manual Document Version 2012-03