Panasonic KX-VC300 Operating Instructions Manual page 95

–
2 or more Digital Boundary
Microphones: Monaural output
–
1 Digital Boundary Microphone: Stereo
output
•
When using Digital Boundary Microphones
and an Analog Boundary Microphone
together, the output for all Boundary
Microphones will be monaural.
7.
Press [Home].
•
The Home screen is displayed.
Setting the MIC Position manually
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
3.
Press [ ].
•
The second page is displayed.
4.
Use [ ][ ] to select "MIC Setting" and press
[Enter].
•
The auto settings screen is displayed.
Note
•
If the manual settings screen is displayed,
proceed to step 6.
5.
Press [B].
•
The manual settings screen is displayed.
Document Version 2012-03
6.
Use [ ][ ] to select the Digital Boundary
Microphone you want to configure and press
[Enter].
7.
Use [ ][ ] to select the Digital Boundary
Microphone's relative position.
"Left side": Sounds on left side are played.
"Right side": Sounds on right side are played.
"Center Mono": All sounds are played through
both the left and right speakers at the same volume.
"Center stereo": Sounds centered on the
microphone are played through both the left and
right speakers at the same volume.
Note
•
When a Digital Boundary Microphone is set
to "Center stereo", make sure that it is
placed with its connector facing the display.
•
When using Digital Boundary Microphones
and an Analog Boundary Microphone
together, the output settings differ as
follows:
–
Digital Boundary Microphones:
Manually set output
–
Analog Boundary Microphone:
Monaural output
•
For the settings shown in the following
diagrams, the left/right channels are
displayed as viewed from the side of the
main video camera.
Here are examples of the relative position of Digital
Boundary Microphones.
When setting Digital Boundary Microphones in
a row perpendicular to the display:
Display
Speaker
R ch
R ch
R ch
Connector
MIC 1: "Center stereo"
MIC 2: "Center stereo"
MIC 3: "Center stereo"
Contacts and Settings
Main video camera
Speaker
L ch
MIC 1
L ch
MIC 2
L ch
MIC 3
Operating Manual 95