Starting A Video Conference; Making A Video Conference Call; Calling Using Speed Dial (2-Party Conference/3-Party Conference/4-Party Conference) - Panasonic KX-VC500 User Manual

Starting a Video Conference

Making a Video Conference Call

You can make a video conference call using one of the following methods.
Note
•
During a video conference call, you cannot perform the following operations:
–
Pressing [Menu] to display the Menu screen.
–
Pressing [Contact] to display the contact list screen.
•
Make sure that peripheral devices (e.g., display, main video camera) are turned on.
•
If a called party does not answer a video conference call within approximately 60 seconds, the call will
be terminated automatically.
•
2-party/3-party/4-party video conference calls can be made using the outgoing call history.
•
Only 2-party video conference calls can be made using the incoming call history.
•
You cannot add parties to an existing video conference call.
•
During a 3-party/4-party video conference call, even if only one party ends the video conference call,
the rest of the parties will also be disconnected.
•
A video conference call will start with only the parties that answered the call. For example, if only one
party answers a 4-party video conference call, the video conference call will start as a 2-party video
conference call.
Calling Using Speed Dial (2-party Conference/3-party Conference/
4-party Conference)
Note
•
To call using speed dial, you need to have a speed dial number programmed in "Speed Dial" in the
contact list. (Page 58)
Calling from the Home Screen (Operation with the Main Unit)
1 Press [Home].
•
The Home screen is displayed.
2 Press [One-Touch Connection] (1 to 5).
•
The LED for the One-Touch Connection number
you pressed lights up.
•
The information registered to the selected
One-Touch Connection number is displayed.
3 Press [Start] to start the call.
28 User Manual
1 2 3 4