Starting A Video Conference; Making A Video Conference Call; Calling Using One-Touch Connection Numbers From The Home Screen - Panasonic KX-VC1300 User Manual

Making a Video Conference Call

You can make a video conference call using one of the following methods.
Note
•
Make sure that peripheral devices (e.g., display, main video camera) are turned on.
•
If a called party does not answer a video conference call within approximately 60 seconds, the call will
be terminated automatically.
•
Only 2-party video conference calls can be made using the incoming call history.
•
The number of bars in the antenna icon will be 0 to indicate communication bandwidth that is lower
than 256 kbps per site. In such cases, the image and voice quality may deteriorate.
•
Video conference calls cannot be made if the call type programmed in the contact list (SIP or H.323)
has been set to "OFF" on the call type settings screen.
•
If a video conference call is made using a profile with an entry restriction, and you want to add a party
to that call, you cannot call the party by entering an address directly or by using the call history.
•
If a video conference call is received during another video conference call, a dialogue box is displayed
to confirm whether to answer the incoming video conference call.
Use [ ][
•
Select "Yes" to answer the video conference call.
•
Select "No" to stop receiving the incoming video conference call and continue your current video
conference call.
Calling Using One-Touch Connection Numbers From the Home
Screen
Note
•
To call using one-touch connection numbers, you need to set them in advance (Page 113).
1 Press [HOME].
•
The Home screen is displayed.
2 With the dial keys, enter a One-Touch Connection number
(1 to 5).
•
The information registered in the selected One-Touch
Connection number is displayed.
3 Press [START] to start the call.
•
You can also start the call pressing [ENTER].
4 When you want to end the call, press [END].
•
The Home screen is displayed.
Document Version 2015-12
] to select "Yes" or "No" and press [ENTER].

Starting a Video Conference

1
3
2
User Manual
4
47