Panasonic KX-VC300 Operating Instructions Manual page 45

1 Press [Menu].
•
The Menu screen is displayed.
2
Select "Call History" using [
•
The outgoing call history screen is displayed.
Note
•
The result of the video conference call is
displayed in the "Call result" column as follows:
•
: The video conference call was
established.
•
: The video conference call was not
established.
•
To move to the incoming call history screen,
press [G]. You can switch between the outgoing
call history screen and the incoming call history
screen by pressing [G].
•
In the incoming call history, if a party is not
registered in your contact list, their IP address (or
host name)/SIP URI (or SIP user name) will be
displayed.
•
In the outgoing call history, if a party is registered
in your contact list, the contact name is
displayed. However, when calling by entering an
IP address, SIP URI (or SIP user name), or
MCU's conference room number@IP address
(Page 41), even if the party is registered in your
contact list, the entered information is displayed.
•
When a contact in the incoming call history is
newly added to your contact list, the incoming
call history will be updated to display the
contact's information from the contact list.
Document Version 2012-03
][ ] and press [Enter].
Starting a Video Conference
1
4
2, 3
Operating Manual
5
45