Selecting A Local Site - Panasonic KX-VC300 Operating Instructions Manual

Contacts and Settings
–
"ON": You can communicate using a SIP
server.
–
"OFF": You cannot communicate using a SIP
server.
Note
•
If SIP settings have not been configured on
the SIP settings screen, you cannot select
"ON" (Page 105). For details, contact your
network administrator.
•
When there is a problem with the SIP
server, or when SIP settings are incorrect
(on the server or on the unit), etc., and video
conference calls cannot be made, on the
Home screen the SIP user name is not
displayed, and instead "SIP is not
registered" is displayed. In this case, you
cannot make calls using IP addresses as
well as SIP. Contact your network
administrator.
5.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The select local site screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.

Selecting a Local Site

1.
Press [Menu].
•
The Menu screen is displayed.
114 Operating Manual
2.
Use [ ][ ] to select "Select local site" and
press [Enter].
•
The select local site screen is displayed.
3.
Use [ ][ ] to select the local site you want to use.
Note
•
For the currently selected local site,
" " is displayed in "Selected".
•
"Not Registered" is displayed for sites that
have not been registered.
4.
Press [G].
•
A dialog box to confirm the temporary use of the
selected local site is displayed.
5.
Use [ ][ ] to select "Yes" and press [Enter].
•
The Home screen is displayed.
Note
•
When the current connection mode and the
selected local site's connection mode are
different, the system will automatically
restart to reflect changes to system
settings.
Note
•
When changing the connection mode, the time
required for a restart may depend on network
conditions.
•
When you select a local site, the name entered
in "Local site name" is displayed instead of the
unit name in the unit information.
•
If you turn the power off and then back on, the
local site is returned to the site set on the system
settings screen.
Document Version 2012-03