Helix Control Head; View Key - Humminbird HELIX 9 Operation Manual

HELIX C
ONTROL
Control Head Keys
ZOOM I
N
Press the ZOOM keys to change the scale of the view.
For a closer view, press the ZOOM IN (+) key. For a
wider view, press the ZOOM OUT (-) key. You can also
magnify the cursor selection.
VIEW
KEY
Press and hold the VIEW key to open the Views
X-Press menu, or press the VIEW key repeatedly until
the view you want to use is displayed on the screen.
Press the EXIT key to display the previous view. See
Views for details.
CHECK/INFO
In the Chart View, press the CHECK/INFO key to see
information about the cursor position or about
objects located near the cursor position. If the cursor
is not active, the Chart Info submenu will open. See
Navigation Overview for details.
The Control Head
H
EAD
(+)/ZOOM O (–)
UT
KEY
KEYS
16
C C
URSOR ONTROL KEY
(LEFT, RIGHT, UP, or DOWN Cursor keys)
Press the arrows on the Cursor Control key
to move through the menu system, select
menus, and change or activate menu
settings. See Menu System Overview for
details.
Also, press any arrow on the Cursor Control
key to move the cursor on the view.
To move the cursor diagonally, press in
between the arrows.