Mark Key; Menu Key; Exit Key; Power Key - Humminbird HELIX 9 Operation Manual

MARK
KEY
Press the MARK key to save a waypoint at the boat
position. If the cursor is active, the waypoint will be
marked at the cursor position. See Navigation
Overview for details.
If Screen Snapshot is turned on, a screen snapshot
will be created with the waypoint, and the screen
snapshot will be saved to the installed SD Card. See
Screen Snapshot for details.
MENU
KEY
To open the X-Press Menu for the on-screen view and
operation mode, press the MENU key once. To open
the Main Menu, press the MENU key twice. See Menu
System Overview for details.
GO TO/M O
AN VERBOARD
With an active cursor, press the GOTO key once to
create a waypoint and start navigation towards that
waypoint. If the cursor is not active, press the GOTO
key, and choose from the saved navigation data. To
start Man Overboard navigation, press and hold the
GOTO key. See Navigation Overview and Man
Overboard (MOB) Navigation for details.
EXIT
KEY
Press the EXIT key to close a menu, close a dialog box,
turn off an alarm, or exit Cursor mode.
Also, press the EXIT key to scroll through the View
Rotation in reverse order. See Views for details.
VIEW SHORTCUT
Press and hold a VIEW SHORTCUT key to save a
shortcut to the on-screen view. You can save one view
on each VIEW SHORTCUT key. See Views for details.
POWER
KEY
Press the POWER key to power on the control head.
To power off, press and hold the POWER key.
During operation, press the POWER key. The backlight
can be adjusted from this menu. You can also turn
on/off Sonar and change the view background color.
(MOB)
KEY
KEY
17
SD Card Slot(s)
The SD card slot on your control head can be used with an SD
card (separate purchase required) to update software, add
detailed charts to your control head, import/export navigation
data, and save sonar recordings and screen snapshots.
Software Updates: For details, see Update Software.
Add Maps: see Chart Overview.
Import/Export Navigation data: See Manage your
Navigation Data.
Sonar Recordings and Screen Snapshots: See Manage
Screen Snapshots and Recordings.
CAUTION! Before the control head software is updated or
restored to system defaults, export your navigation data (see
Update Software).
Insert the SD card with the
label facing to the left
Insert an SD Card
1. Remove the SD card slot cover.
2. Position the SD card so that the label faces to the left.
3. Insert the card into the slot until it clicks into place.
4. Replace the slot cover so it is secure.
5. Remove: Press the card into the slot and then release it.
The card will eject. Pull the card carefully from the slot.
NOTE: Do not leave the SD card slot cover open. The slot
cover should always be closed to prevent water damage to
the unit.
The Control Head