Edit A Waypoint - Humminbird HELIX 9 Operation Manual

Edit a Waypoint

You can edit a waypoint as you mark it or after it is saved. The instructions in this section show you how to edit a waypoint in the
Chart View. To edit a waypoint or a group of waypoints from the Waypoint Management dialog box, see Manage your Navigation Data.
Mark and Edit Waypoints (on-the-go)
Use the instructions in this section to edit a waypoint as soon as you mark it.
1. Setup: See Change New Waypoint Settings. Set the New Waypoint Icon menu to Select.
2. Press the MARK key.
OR
Use the Cursor Control key to move the cursor to a position. Press the MARK key.
3. Edit: When you mark a waypoint, the Waypoint Settings menu will display so you can edit the waypoint.
No Changes: To proceed without making changes, press the MARK key (again).
Edit a Waypoint in the Chart View
Use these instructions to edit a waypoint from the Chart View. You can also edit waypoints in the Waypoint Management dialog box
(see Manage your Navigation Data).
1. Use the Cursor Control key to move the cursor to a waypoint on the Chart View.
2. Press the MENU key.
3. Select the waypoint name from the X-Press Menu. Press the RIGHT Cursor key.
4. Select Edit. Press the RIGHT Cursor key.
5. Use the Edit Waypoint menu to edit the waypoint name, icon, and more (see Manage your Navigation Data for more
information).
Editing a Waypoint from the X-Press Menu
selected waypoint
113
selecting
Edit from
the
waypoint
submenu
Waypoints