Delete a Waypoint in the Chart View
Use the following instructions to select a waypoint and delete it.
1. Use the Cursor Control key to move the cursor to a waypoint on the Chart View.
2. Press the MENU key.
3. Select the waypoint name from the X-Press Menu. Press the RIGHT Cursor key.
4. Select Delete. Press the RIGHT Cursor key.
Navigate to a Waypoint or Position
1. Use the Cursor Control key to move the cursor to a waypoint or position on the chart.
2. Press the GOTO key.
NOTE: If you are starting navigation to the cursor position, a waypoint will be marked when you press the GOTO key.
cursor position
cursor
digital
readouts
Waypoints
Starting Navigation to the Cursor Position
distance to cursor position
Move the Cursor
116
bearing to cursor position
Start Navigation
destination
waypoint
name
off course
limits