Heat & Glo LUX42 Installation Manual page 54

A. Vent Components Diagrams (continued)
EFFECTIVE LENGTH
32 IN. (813 mm) MIN.
35 IN. (889 mm) MAX.
12-1/2 IN.
(318 mm)
Figure 12.4 Vent Components
54
12 in.
305 mm
7-1/4 in.
(184 mm)
5-1/4 in.
(133 mm)
DVP-TVHW
VerticalTermination Cap (Highwind)
13-5/8 IN.
346 mm
12-1/2 IN.
318 mm
20-3/4 IN.
527 mm
PVI-SLP
Power Vent Inline
16 IN.
406 mm
9-3/16 IN.
(233 mm)
13-5/8 IN.
(346 mm)
SLP Low Profi le Cap
Heat & Glo • LUX36, LUX42 Installation Manual
12-1/2 in.
(318 mm)
Optional Wire Harness
DESCRIPTION
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
80 ft. PV Wire Harness
100 ft. PV Wire Harness
Note: Wire harnesses required to power the PVI-SLP
connect to the appliance and are ordered separately from
PVI-SLP. Contact your dealer to order.
Note: Use only approved termination caps with the
PVI-SLP. See instructions included with PVI-SLP kit.
4-1/2 IN.
114 mm
16-11/16 IN.
424 mm
SLP-LPC
• 2287-980 Rev. L • 4/16 • 2287-980 Rev. L
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
15 IN.
(381 mm)
16-11/16 IN.
(424 mm)