Cowling And Spinner Installation - Four-Stroke Engine - Hangar 9 Pulse 125 Assembly Manual


Step 8
Use the tie wrap to secure the fuel tank in the fuselage. Trim
the excess using side cutters.

Step 9
Glue a brace at the rear of the tank to keep it from sliding
back in the fuselage. A piece of foam on the brace will help
hold the tank securely.
Hangar 9 Pulse 125 ARF Assembly Manual

Step 10
Attach the hatch back on the fuselage.

Step 11
Use double-sided tape to attach the remote receiver on the
side of the fuselage opposite the throttle servo. The antenna
wires should face up and down for the best reception of your
radio system.
Cowling and Spinner installation -
Four-Stroke Engine
Required Parts
Fuselage Cowling
Spinner backplate Spinner cone
3mm x 10mm self-tapping screw (2)
3mm x 8mm button head screw (4)
Tools and Adhesives
Cardstock Low-tack tape
Felt-tipped pen Hobby scissors
Phillips screwdriver: #2
Rotary tool with sanding drum
Hex wrench or ball driver: 2mm

Step 1
Cut a piece of cardstock to fit around the engine as shown.
This will be the template for trimming your cowling.
25