Charging Your Oontz Angle 3Xl; Pairing And Connecting The Oontz Angle 3Xl To Your Bluetooth Device: Smartphone, Iphone - Oontz ANGLE 3XL User Manual

Charging your
4
OontZ Angle 3XL
To charge your OontZ Angle 3XL, plug the
connector end of the included power
adapter into the Charging Jack (16). Plug
the other end into a wall outlet. You can
play your speaker while charging.
- When charging, the Charging Indicator
Light (1) will flash red, slowly.
- When fully charged it will turn solid red.
- The speaker will take about 4 hours to
fully charge. We recommend you fully
charge your speaker during the first use.
Note: When playing from battery power the
OontZ Angle 3XL will turn off after 30 minutes
of not playing audio.
Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device:
5
smartphone, iPhone
Step 1 – To turn on your OontZ Angle 3XL press and release the ON/OFF Button (2). The Bluetooth
Indicator Light (3) will flash blue and you will hear the voice prompt: "Ready for connecting". This
indicates that the speaker is in pairing mode and it is ready to pair and connect to your device.
Step 2 – Enable the Bluetooth function on your device and then search/scan for
the OontZ Angle 3XL. When "OontZ Angle 3XL" appears on the Bluetooth device
list, select it and your device will pair and connect to the speaker. Make sure
your device indicates that it is connected to "OontZ Angle 3XL" in your device
list.
If your device requests a password, enter "0000".
Step 3 – The Bluetooth Indicator Light (3) will turn solid blue to indicate that
the OontZ Angle 3XL is paired and connected to your device and you will
hear the voice prompt: "Connected".
You can now play wirelessly from your device.
- PAGE 4 -
, tablet, iPad , Bluetooth iPod
TM TM TM