Removing The Brushroll - Simplicity Pixie Owner's Manual

Removing the Brushroll

• Remove the floor nozzle by pressing the floor
nozzle release button on the back of the
vacuum (Fig. 1).
• Turn the floor nozzle over. Use a screwdriver
or a coin to turn the screw once to the left.
Then lift off the brushroll cover (Fig. 2).
• Remove brushroll from floor nozzle to clean
or replace (Fig. 3).
• Replace brushroll then replace brushroll cover.
Tighten the screw by turing once to the right.
• Re-attach floor nozzle.
MAINTENANCE AND CARE
11
Fig. 1
Fig. 2
Fig. 3