Assembling The Vacuum; Attaching The Handle; Attaching / Removing The Floor Nozzle; Attaching / Removing The Dust Cup - Simplicity Pixie Owner's Manual

ASSEMBLING THE VACUUM

NOTE: Always unplug the vacuum before
assembling or removing accessories.

Attaching the Handle

Insert the handle tube into the top of the
vacuum (Fig. 1) until it clicks into place.
Attaching the Floor Nozzle
Place the floor nozzle on the floor with the
neck locked in the upright position. Line up
the neck of the floor nozzle with the inlet at Fig. 2
Fig. 1
the base of the vacuum. (Fig. 2) Push until it
clicks into place.
Attaching the Dust Cup
Line up the bottom of the dust cup with
the main body. Push the upper dust cup release
button while pushing the top of the dust
cup into the handle tube until it clicks into
place (Fig. 3).

Attaching the Power Cord

Attach the cord to the hook on the back of
the handle, then wrap the cord around the
upper and lower cord hooks (Fig. 4).
Fig. 3
Fig. 4
5