Replacing The Filter; Removing The Brushroll; Cleaning The Brushroll - Simplicity S65D Owner's Manual

MAINTENANCE AND CARE
WARNING: Always turn off
the vacuum and remove the
battery before performing any
service.

Replacing the Filter

1. Lift up the filter release knob and
remove the filter holder from the
vacuum (Fig. 1).
2. Turn the filter clockwise to remove
from the filter holder (Fig. 2).
3. Replace with a new filter turning
it clockwise until it snaps into the
filter holder.
4. Replace the filter holder into the
vacuum (Fig. 3).
NOTE: Filter cannot be washed
and reused.
When to Change the filters
If someone in your household suffers
from allergies, it is recommended you
change the filter every six months.
Otherwise, the filter should be replaced
every year.
14
Fig. 1
Fig. 2
Fig. 3

Removing the Brushroll

WARNING: Always turn off
the vacuum and remove the
battery before performing any
service.
1. Remove the floor nozzle from the
wand. Turn the floor nozzle over
(Fig. 1).
2. Use a coin or screwdriver to turn the
screw counter-clockwise (Fig. 2). Then
lift off the brushroll cover.
3. Remove the brushroll to clean.
4. Replace the brushroll then replace the
brushroll cover. Tighten the screw by
turning once clockwise.
5. Re-attach the floor nozzle to the wand
and continue to vacuum.

Cleaning the Brushroll

WARNING: Always turn off
the vacuum and remove the
battery before performing any
service.
1. To maintain efficient cleaning, the
brushroll must be kept free of carpet
fiber, string, or hair buildup. After
every 7 to 10 uses, remove the battery
and turn the vacuum cleaner over
and check the brushroll for fiber and
hair buildup.
2. Use scissors to remove any buildup
entangled around the brushroll
(Fig. 3).
MAINTENANCE AND CARE
Fig. 1
Fig. 2
Fig. 3
15