Replacing The Filters - Simplicity Pixie Owner's Manual

Replacing the Filters

WARNING: Always unplug the vacuum from
the electrical outlet before removing the
filters.
Replacing the HEPA Media Filter
• Turn the vacuum off and unplug the power
cord from the wall outlet.
• Remove the dust cup from the vacuum by
pressing the upper dust cup release button
on top of the dust cup (Fig. 1).
• Push up on the dust cup cover latch
(Fig. 2). Remove the HEPA media filter by
grasping the tab on the top of the filter and
pulling straight up.
• Replace with a new filter (Fig 3).
• Replace the dust cup onto the vacuum.
Replacing the Foam Filter
• Turn the vacuum off and unplug the power
cord from the wall outlet.
• Remove the dust cup from the vacuum by
pressing the upper dust cup release button
on top of the dust cup (Fig. 1).
• Remove the foam filter from the base of
the vacuum body underneath the dust cup.
Replace with a new filter (Fig. 4).
• Replace the dust cup onto the vacuum.
MAINTENANCE AND CARE
Fig. 3
9
Fig. 1
Fig. 2
Fig. 4