Jenn-Air W156 Use And Care Manual page 23

EXAMPLE: If cooking time selected for the oven is 2 hours and 30 minutes, the
Display will show:
2 :='r'gqS° u :,
OVEN TIME []
Three seconds after turning dial, Display will return to current time of day and
the Indicator Word TIMED will appear in the Display.
8. Touch Stop Time Pad.
Indicator Words OVEN, STOP and TIME will flash. Display will show the calculated
stop time based on current time of day and cook time.
NOTE: Probe set temperature will control the actual bake time. Probe temperature,
not stop time, will turn oven off when food is done. Stop time is programmed
for the purpose of computing start time.
9. Turn Set Dial to enter stop time.
Set Dial must be turned clockwise. A stop time can only be accepted for later
in the day.
EXAMPLE: If at 10 o'clock you set the oven for a probe temperature, for 350 °
convection baking and 2 hours and 30 minutes cooking time, the calculated stop
time would be "12:30". The Display would show:
PM L|
OVEN STOP TIME []
If you want the stop time to be 1 o'clock, turn the Set Dial until "1:00" appears ..._
in the Display Window. After three seconds, the Display will show:
Ii-I •i-I i-I 350 °
fI_l• I._t co.v
BELAY TIMED BAKE
When selected probe internal temperature has been reached, the oven will shut
off and the signal will beep 3 times. If the probe is not removed, the actual probe
temperature will be in the Display. The temperature will flash and the signal will
beep continuously until the probe is removed.
To recall a selected temperature or time: Touch the appropriate function pad.
NOTE: If more than 10 seconds elapse between touching a function pad and
turning the Set Dial, the on-going program returns to the Display.
J
24