Jenn-Air W156 Use And Care Manual page 22

After 3 seconds the Display will show probe temperature or. 095°, whichever is higher.
Indicator Words CONV and BAKE will flash.
.... l l-I .F-'t i -'l q 5°
I LI . Lt LI
6. Touch Bake Pad or Convection Bake Pad.
Indicator Words BAKE or CONV BAKE will flash and Display will show 3 dashes.
7. Turn Set Dial until desired oven temperature appears in the Display.
The Set Dial must be turned clockwise one click. 325° will be shown. Then, the Set
Dial can be turned in either direction until the desired temperature appears in the
Display.
EXAMPLE: If at 10 o'clock you set the oven for a probe temperature and to convect
bake at 350°, after 3 seconds the Display will show:
IF--I.FIF-I q5 o
ILl,, LIE I c0,v BAKE
[]
When selected temperature has been reached, the oven will shut off and the signal
will beep 3 times. If the probe is not removed, the actual probe temperature will be
in the Display. The temperature will flash and the signal will beep continuously until
the probe is removed.
NOTE: Once selected internal temperature has been reached, unplug the probe from
the oven and remove food immediately to prevent overcookinq. Hold plug with potholder.
IMPORTANT: The probe must be unplugged and removed from oven when it is not
being used. If probe is left plugged in oven and Probe feature is not programmed,
the signal will beep and temperature will flash continuously. Be sure metal cover is
...... over receptacle when Probe feature is not being used.
To recall oven temperature selected: Touch the appropriate Bake Pad. The temperature
will be displayed briefly before returning to probe temperature.
To change oven temperature set: Touch appropriate pad and turn Set Dial to new desired
tern perat ure.
To use Probe feature to start at future time and shut off automatically:
IMPORTANT: Both estimated cook time and stop time must be set or oven will start
immediately. Therefore, follow all nine steps.
1. Insert probe.
2. Touch Probe Pad.
3. Turn Set Dial to desired temperature.
4. Touch Bake Pad or Convection Bake Pad.
5. Turn Set Dial to desired temperature.
6. Touch Cook Time Pad.
Indicator Words OVEN and TIME will flash and Display will show "0 HR :00".
NOTE W256 OWNERS: The appropriate number (1-upper oven; 2-lower oven) will also
flash.
7_ Turn Set Dial to enter cooking hours in 5 minute increments.
Hours are to left of colon and minutes to right of colon.
(Allowable range is 5 minutes to 11 hours and 50 minutes.)
23