HP t610 Series Troubleshooting Manual page 31

To install a PCIe card:
1. Press down on the plastic blank tab and pull it out of the chassis.
Figure 2-20 Removing the expansion slot blank
2. Open the metal latch securing the expansion slot cover on the inside of the thin client (1) and
remove the expansion slot cover (2).
Figure 2-21 Removing the expansion slot cover
CAUTION: Do not lose this expansion slot cover. If you remove an expansion card, you must
replace it with a new card or expansion slot cover for proper cooling of internal components
during operation.
Installing thin client options 25