HP t610 Series Troubleshooting Manual page 65

Table A-1 HP t610 Thin Client (continued)
Power Supply
Operating Input Voltage Range
Rated Line Frequency
Power Output (maximum)
Table A-2 HP t610 PLUS Thin Client
Dimensions
Width (front to back)
Height (top to bottom, without stand)
Depth (side to side)
Approximate Weight (without stand)
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of
1° C/300m (1.8° F/1000ft) to a maximum of 3km
(10,000ft), with no direct, sustained sunlight. Upper limit
may be limited by the type and number of options
installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500
ft per minute)
Nonoperating
(max. allowed rate of change is 45 7m per minute or 1500
ft per minute)
100–240 VAC
50–60 Hz
65 W
220 mm
240 mm
65 mm
1.98 kg
10° to 40° C
-30° to 60° C
** The operating temperature range when the thin
client is attached to a flat panel using the HP Quick
Release is 50° to 95° F (10° to 35° C).
10–90%
5–95%
3048 m
9,144 m
100–240 VAC
50–60 Hz
65 W
8.7 in.
9.4 in
2.6 in.
4.37 lb
50° to 104° F
-22° to 140° F
10–90%
5–95%
10,000 ft
30,000 ft
59