NOTE:
7.
Replace the side access panel and metal side cover. See
access panel and metal side cover on page 11
8.
Install the stand, if you will be using the thin client unmounted in a vertical orientation. See
Installing the stand on page 6
9.
Reconnect any external devices and power cords.
10.
Turn on the monitor, the thin client, and any devices you want to test.
11.
Load any necessary drivers.
NOTE:
eng/support.html.
12.
Reconfigure the thin client, if necessary.
10
Chapter 2 Hardware changes
Option kits include more detailed installation instructions.
for more information.
You can download select hardware drivers from HP at
Removing and replacing the side
for more information.
http://www.hp.com/country/us/