Authorizing Remote Installation Services (Ris Pxe Server); Configuring Remote Installation Services; Set User Permissions On The Active Directory Server - HP t610 Series Troubleshooting Manual

Authorizing Remote Installation Services (RIS PXE
Server)
If you have installed RIS on a server other than the server running DHCP, authorize PXE with DHCP
as follows:
1. Record the IP address of the RIS PXE Server.
2. Log on to the DHCP Server as administrator.
3. From the Control Panel, double-click Administrative Tools.
4. Double-click DHCP.
5. Right-click DHCP (just above the domain name) and select Manage Authorized Servers.
6. Click Authorize.
7. Type the IP address of your RIS PXE server and click OK.
8. Click OK.
9. Log off from the DHCP Server.

Configuring Remote Installation Services

Use the default option to have RIS install on second hard drive (D:\ or E:\).
1. Click Start > Run.
2. Type Risetup.exe and click Next.
3. Click Next.
4. Select Respond to client computers requesting service.
5. Click Next.
6. Insert the Windows 2000 Professional CD into the CD-ROM drive and enter the path to the CD-
ROM drive (usually drive D:\ or E:\).
7. Click Next.
8. Click Next.
9. Click Next.
10. When the installation is complete, click Finish.

Set User Permissions on the Active Directory Server

On the active directory server:
1. Click Start > Programs > Administrative Tools.
2. Click Active Directory Users and Computers.
3. Right-click on the appropriate domain name

Authorizing Remote Installation Services (RIS PXE Server)

63