HP t610 Series Troubleshooting Manual page 51

POST Delay (in None
seconds)
Bypass F1 Prompt Disable
on Configuration
Changes
Sunday – Saturday Disable
BIOS Power-On 00:00
Time (hh:mm)
PCI SERR# Enable
Generation
PCI VGA Palette Disable
Snooping
Printer Mode EPP+ECP
Num Lock State at Off
Power-On
Integrated Video Auto
UMA Size 512M
Internal Speaker Enable
NIC Option ROM PXE
Download
Serial Port A IO=3F8; IRQ=4
Serial Port B IO=2F8; IRQ=3
Parallel Port IO=378; IRQ=7;
DMA=1
Default Setup Leave Defaults As Is
(No Update)
Apply Defaults and Do Not Apply
Exit
Power-On Password na
Setup Password na
NOTE: Settings that can be controlled from the operating system with repset can also be controlled
remotely by sending the client an Altiris job that uses the repset tool to apply the setting changes.
5, 10, 15, 20
Enable
Enable
na
Disable
Enable
Bi-Directional, Output-Only
On
Disable, Force
32M, 64M, 256M, 512M, 1G
Disable
Disable
Disabled, IO=3F8; IRQ=3, IO=2F8; IRQ=4, IO=2F8; IRQ=3, IO=3E8; IRQ=4,
IO=3E8; IRQ=3, IO=2E8; IRQ=4, IO=2E8; IRQ=3, IO=3F8; IRQ=6, IO=3F8;
IRQ=5, IO=2F8; IRQ=6, IO=2F8; IRQ=5, IO=3E8; IRQ=6, IO=3E8; IRQ=5,
IO=2E8; IRQ=6, IO=2E8; IRQ=5
IO=3F8; IRQ=4, IO=3F8; IRQ=3, IO=2F8; IRQ=4, IO=3E8; IRQ=4, IO=3E8;
IRQ=3, IO=2E8; IRQ=4, IO=2E8; IRQ=3, IO=3F8; IRQ=6, IO=3F8; IRQ=5,
IO=2F8; IRQ=6, IO=2F8; IRQ=5, IO=3E8; IRQ=6, IO=3E8; IRQ=5, IO=2E8;
IRQ=6, IO=2E8; IRQ=5
Disable, IO=378; IRQ=7, IO=278; IRQ=7, IO=3BC; IRQ=7, IO=378; ,
IO=278; , IO=3BC, IO=378; IRQ=7; DMA=3, IO=278; IRQ=7; DMA=1,
IO=278; IRQ=7; DMA=3, IO=3BC; IRQ=7; DMA=1, IO=3BC; IRQ=7; DMA=3
Save Current Settings as Default, Restore Factory Settings as Default
Apply
na
na
Changing BIOS Settings from the REPSETUP utility 45