Appendix A Specifications - HP t610 Series Troubleshooting Manual

A Specifications
Table A-1
Dimensions
Width (front to back)
Height (top to bottom, without stand)
Depth (side to side)
Approximate Weight (without stand)
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of
1° C/300m (1.8° F/1000ft) to a maximum of 3km
(10,000ft), with no direct, sustained sunlight. Upper limit
may be limited by the type and number of options
installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500
ft per minute)
Nonoperating
(max. allowed rate of change is 457 m per minute or 1500
ft per minute)
58

Appendix A Specifications

HP t610 Thin Client
220 mm 8.7 in.
240 mm 9.4 in
40 mm 1.6 in.
1.49 kg 3.29 lb
10° to 40° C 50° to 104° F
-30° to 60° C -22° to 140° F
** The operating temperature range when the thin
client is attached to a flat panel using the HP Quick
Release is 50° to 95° F (10° to 35° C).
10–90% 10–90%
5–95% 5–95%
10,000 ft
3048 m
30,000 ft
9,144 m