Connecting Optional Devices; Optional Device Connections - VeriFone VX 520 Installation Manual

6
Figure 11
Before inserting the MSAM card, position it as shown in
NOTE
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
7
Connecting The VX 520 Color D/E CTLS terminal supports some peripheral devices designed
Optional
for use with electronic point-of-sale terminals.
Devices
Before connecting any peripheral device, remove the power cord from the
CAUTION
terminal. Reconnect the power cord only after you are finished connecting the
peripheral device(s). For complete information about peripheral installation and
use, refer to the user documentation supplied with those devices.
Different terminals support different devices, so for more information about
optional devices, please contact your VeriFone distributor.
Optional Device
The VX 520 Color D/E CTLS terminal has a port that can operate either as a PIN
Connections
pad port or an RS-232 port, depending on the power source available.
Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Installing an MSAM Card in a VX 520 Color D/E CTLS Terminal
Close the MSAM cardholder panel, and then replace the terminal rear cover.

Connecting Optional Devices

Figure 11, with the card's
VX 520 C D/E CTLS I
OLOR NSTALLATION
T S
ERMINAL ETUP
23
G
UIDE