Toshiba Satellite R10 Maintenance Manual page 248

4 Replacement Procedures
Install ing the memory module
To install the memory module(s), confirm that the computer is in boot mode. Then
perform the following procedure. (See Figure 4 -4.)
1. Insert the memory module into the connector of the computer slantwise (terminal
side first) and press it to connect firmly.
Caution: The power must be turned off when you insert the memory module. Inserting
a memory module with the power on risks damaging the module or the
computer itself.
Never press hard or bend the memory module.
When installing a memory module, be careful not to insert a memory module
into the expansion memory slot (inner slot).
2. Install the memory slot cover.
3. Secure the screw (with e-ring) to fix the memory slot cover.
Satellite R10 Maintenance Manual (960-509)
4.4 Memory module
4-13