Setting The Stitch Length / Fullness; Entering The Standard Stitch Length / Fullness; Entering A Second Stitch Length / Fullness - Pfaff 3734 - 2/01 Instruction Manual

Preparation
9

Setting the stitch length / fullness

.06
The stitch length is determined by setting the feed strokes of the roller presser and feed
wheel. To apply fullness the feed stroke of the roller presser must be larger than that of the
feed wheel.
9

Entering the standard stitch length / fullness

.06.01
After the machine has been switched on, the current values for the stitch lengths of the roller
presser and feed wheel are shown on the display screen.
9

Entering a second stitch length / fullness

.06.02
With the program key a second fullness setting can be stipulated in addition to the standard
setting. When the program key is activated, it is possible to switch from one fullness to the
other using the knee switch.
9 - 6
Switch on the machine.
2.4
Set the stitch length ( feed stroke ) of the roller presser by pressing +/- ( key P ).
Set the stitch length ( feed stroke ) of the feed wheel by pressing +/- ( key L ).
Switch on the machine.
Press the program key.
Sew 1 – 2 stitches and operate the knee switch.
Set the stitch length ( feed stroke ) of the roller presser by pressing +/- ( key P ).
Set the stitch length ( feed stroke ) of the feed wheel by pressing +/- ( key L ).
3.0
2.4
2.0
< Knee switch >
2.4 2.4