Table of Contents
Advertisement
10
Sewing
10
Applying fullness
.01
The machine must be installed and connected in accordance with Chapter 8 Installation and
Commissioning.
Set up the machine, see Chapter 9 Setting up.
Switch on the machine, see Chapter 7.01 On / off switch.
If necessary change the amount of fullness, see Chapter 9.06.01 Standard stitch
length / fullness.
The second amount of fullness can be selected by operating the knee switch when the
program key is activated ( LED on ). Also see Chapter 9.06.02 Entering a second stitch
length / fullness.
The sewing functions are selected with the right pedal, see Chapter 7.02 Pedal.
To adjust the variable fullness within a specified range, operate the left pedal accordingly.
Sewing
10 - 1
Advertisement
Table of Contents
