Entering The Stitch Length; Entering The Standard Stitch Length; Entering A Second Stitch Length Or Amount Of Fullness - Pfaff 3734 -12 Instruction Manual

Setting up
9

Entering the stitch length

.06
The stitch length is determined by adjusting the feed strokes of the feed band and the feed
wheel. When applying fullness, the feed stroke of the feed band must be larger or smaller
that the feed stroke of the feed wheel.
9

Entering the standard stitch length

.06.01
9

Entering a second stitch length or amount of fullness

.06.02
With the PM key, in addition to the standard stitch length a second stitch length or fullness
setting can be determined. In the programmed sewing mode ( text "PM" on the display ) it
is possible to switch from one setting to the other by operating the knee switch.
9 - 5
Switch on the machine.
After the machine has been switched on, the current values of the stitch lengths for the
feed band and the feed wheel are shown on the display.
Set the stitch length ( feed stroke ) for the feed band by pressing the corresponding
+/- key.
Set the stitch length ( feed stroke ) for the feed wheel by pressing the corresponding
+/- key.
PM
1
Switch on the machine and press the PM key to move into the programmed sewing
mode.
Select the program number (1 or 2) by pressing the corresponding +/- key.
Set the stitch length (feed stroke) for the feed band by pressing the corresponding +/- key.
Set the stitch length (feed stroke) for the feed wheel by pressing the corresponding
+/- key.
2.5 2.5
2
1 2.6 2.5