Table of Contents
Advertisement
12.
Tension release
04.13
Requirement
With lever 1 raised or the automatic presser foot lifter activated, both tension discs 6 must
be at least 0.5 mm apart.
Fig. 12 - 13
Raise the roller presser using lever 1.
Adjust screw 2 ( nut 3 ) in accordance with the requirement.
Raise the roller presser using the automatic presser foot lifter or the knee lever.
Move the drive dog 4 ( screw 5 ) in accordance with the requirement.
2
3
1
Adjustment
4
5
6
0.5 mm
12 - 15
Advertisement
Table of Contents
